From mboxrd@z Thu Jan 1 00:00:00 1970 From: LuisMi Date: Sat, 09 Nov 2002 14:21:04 +0000 Subject: Re: [LARTC] Route Vlans Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable To: lartc@vger.kernel.org -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I am trying to do that, my scheme is this: Internet ->\ /--> VLAN 1 >Linux Router/FW<-- Switch 3Com-|--> VLAN 2 ATM ------>/ \--> VLAN 3 The switch is a 3Com Switch SuperStack II 3300 Some vlans will have access to internet and not to ATM network, and=20 vice versa. VLAN 1 and VLAN 2 should be avaible between them, in other words, some=20 services into VLAN 1 must be avaible to VLAN 2. My dude is... Ok, Linux is running some sub-interfaces using 802.1q under eth0 only. So I only have one physical interface connected to the switch, where is=20 the switch port where I need to connect that interfaces? Uplink port? Is that possible? If it isn't possible I think I should use another computer, so I will have = one linux for fw/routing and other with many physical interfaces as vlans=20 I have into the switch, is that correct? Let me know your opinions. :) - --=20 Luis Miguel Cruz. =20 CCNA | [ADPSOFT] http://www.adpsoft.com PGP KEY: 0x3AC52657 | "Connecting your business" On Fri, 8 Nov 2002, Martin A. Brown wrote: > Laurent, >=20 > You should be able to do it with some elbow grease and Ben Greear's linux= =20 > vlan implementation. =20 >=20 > http://www.candelatech.com/~greear/vlan.html >=20 > This allows you to attach a single ethernet device to an 802.1q port on=20 > your switch, and configure multiple interfaces for each VLAN. >=20 > If you want to route, just turn the box into a router--sure it has only=20 > one ethernet cable, but it has multiple interfaces, right? >=20 > I have no experience with it. >=20 > Good luck,=20 >=20 > -Martin >=20 > : Hello, > :=20 > : Is it possible with a linux Bow to route diff=E9rents VLANs, like a ro= uter > :=20 > : cisco can does ? > :=20 > : Thank for your answers > :=20 > : Laurent Foucher > :=20 > : _______________________________________________ > : LARTC mailing list / LARTC@mailman.ds9a.nl > : http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/ > :=20 >=20 >=20 -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.6 (GNU/Linux) Comment: For info see http://www.gnupg.org iEYEARECAAYFAj3NGdEACgkQvQHLTzrFJleb2ACeKemjK1PgRENYvyLBoYnIUEGc dhEAoIMvkYOpbD8HDY+MxfWxpZwZYooS =3DxpOL -----END PGP SIGNATURE----- _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/