From mboxrd@z Thu Jan 1 00:00:00 1970 From: Rob Date: Sun, 17 Nov 2002 16:58:36 +0000 Subject: Re: [LARTC] wshaper syntax, edonkey Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org try: # low priority source ports NOPRIOPORTSRC='4661 4662 4665 1214' # low priority destination ports NOPRIOPORTDST='4661 4662 4665 1214' the ticks are the key :) -Rob On Sun, 17 Nov 2002 03:46:58 -0500 (EST) war_pig wrote: > hi > i had wshaper working fine to keep kazza and DC from eating up > everything, but im having some troubles getting edonkey/emule under > control. > > part of it is, i cant figure out how to pass multiple ports to the vars > in the script > > everything i have tried gets an illegal match error, and i see a "for $a > do" in there... > > also, im not familiar with edonkeys ports, beyond one port that I set, > and a number of other varialbe ports in the 3000-3500 range it seems to > listen and make connections on > > i know this is a n00b question... > > -- > > > But it was all right, everything was all right, the struggle was > finished. He had won the victory over himself. He loved Big Brother. > > > > > _______________________________________________ > LARTC mailing list / LARTC@mailman.ds9a.nl > http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/ _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/