From: "Ethy H. Brito" <ethy@inexo.com.br>
To: lartc@vger.kernel.org
Subject: Re: [LARTC] promisc mode
Date: Wed, 20 Nov 2002 14:24:57 +0000 [thread overview]
Message-ID: <marc-lartc-103780234604291@msgid-missing> (raw)
In-Reply-To: <marc-lartc-103771630721463@msgid-missing>
On Wed, 20 Nov 2002, Cristian Ionescu-Idbohrn wrote:
> ip from the latest stable iproute2-2.4.7-now-ss010824 doesn't seem to
> be able to do that. It can do other things like:
>
> # ip link set eth0 multicast off
>
> but not:
>
> # ip link set eth0 promisc off
>
> (as one would expect it to).
As I already mentioned too!
> You'll have to use:
>
> # ifconfig eth0 promisc
> # ifconfig eth0 -promisc
That's my problem. "ifconfig eth0 -promisc" doesn't take the card from
promiscuous mode. (Don't ask why. I really do not know.).
The problem starts when I execute tcpdump with -p (not to promisc)
parameter. The card driver seems not be respecting that and enters promisc
anyway. It only leaves promisc mode if I run tcpdump again entering
promisc mode (without -p).
I was in hope that 'ip' could do that to me (take it from promisc mode).
I read some email in this thread about some iproute2 version executing
'promisc off'. What version could that be? A beta release?
Ethy H. Brito /"\
InterNexo Ltda. \ / CAMPANHA DA FITA ASCII - CONTRA MAIL HTML
(012) 341-6860 X ASCII RIBBON CAMPAIGN - AGAINST HTML MAIL
Sao Jose dos Campos / \
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
next prev parent reply other threads:[~2002-11-20 14:24 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-11-19 14:30 [LARTC] promisc mode Ethy H. Brito
2002-11-19 14:34 ` Martin A. Brown
2002-11-19 14:46 ` Ethy H. Brito
2002-11-19 15:24 ` Martin A. Brown
2002-11-20 13:34 ` Cristian Ionescu-Idbohrn
2002-11-20 14:24 ` Ethy H. Brito [this message]
-- strict thread matches above, loose matches on Subject: below --
2002-07-06 11:34 [LARTC] PROMISC mode Vanitha
2002-07-06 11:43 ` Stef Coene
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=marc-lartc-103780234604291@msgid-missing \
--to=ethy@inexo.com.br \
--cc=lartc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.