From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stef Coene Date: Sun, 24 Nov 2002 20:16:50 +0000 Subject: Re: [LARTC] Newbie: Installing Traffic Shaping Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org On Sunday 24 November 2002 20:19, Christian Meier wrote: > Hello List! > > My distribution is SuSE 7.3 Prof. I've successfully installed the > iproute2 packet. If I enter some tc-rules the machine returns no > errors, but the rules do not affect the bandwidth! If you have no errors, you have all the support in the kernel you need. > Does this mean that the kernel is not compiled with the necessary > options? Where can I see, which options the kernel was compiled with > (sorry, but I'm newbie)? I didn't change anything, it's a normal SuSE > 7.3 distribution. Maybe you can find a config file in the /boot directory. > If I knew that the modules are working, I could go on trying to > install some rules, or could anyone be so kind and post a simple rule > that is slowing down my eth0 interface? I'd just like to see if the > tc-command and the kernel is working... I have some scripts on www.docm.org. You can also try to add a tvb qdisc as root qdisc. This will limit all outgoing traffic. Stef -- stef.coene@docum.org "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/