From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Folke Aeon" Date: Sun, 01 Dec 2002 11:21:40 +0000 Subject: Re: [LARTC] a question about tc filter Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable To: lartc@vger.kernel.org thanks :) but what if i setup color-aware filters for AF PHB? say, there is two filters , both have to match the packets from the source ip 10.0.0.1/24 to the destination 10.0.1.1/24 , and at same time, the first one with a police rate and a burst size and a continue option, while the second one with a relatively lower priority which will match the packets excess the police rate. thus, the iptables cannot tell me the two colored-counters value respectively, it can only tell me the total packets matched by the two filters , am i right? >From: Stef Coene >To: "Folke Aeon" , lartc@mailman.ds9a.nl >Subject: Re: [LARTC] a question about tc filter >Date: Sun, 1 Dec 2002 10:58:50 +0100 > >On Sunday 01 December 2002 08:18, Folke Aeon wrote: > > hi, all > > > > i run the following scripts : > > tc qdisc add dev eth0 handle ffff: ingress > > tc filter add dev eth0 parent ffff: protocol ip \ > > pref 4 u32 match ip dst 10.0.0.1 flowid :1 > > > > my question is : > > > > can i know how many packets are matched by > > this filter? >No > > > if i can , what should i do to get this > > counter value, then. >But you can make a iptables rule that matches the same packets. Iptables = >has >builtin counters for bytes and packets. > >Stef > >-- > >stef.coene@docum.org > "Using Linux as bandwidth manager" > http://www.docum.org/ > #lartc @ irc.oftc.net _________________________________________________________________ Add photos to your e-mail with MSN 8. Get 2 months FREE*.=20 http://join.msn.com/?page=FEatures/featuredemail _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/