From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Kaustubh Phanse" Date: Mon, 02 Dec 2002 21:42:10 +0000 Subject: [LARTC] Marking and bandwidth share Message-Id: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Hello! I am trying to figure out a way to accomplish both DSCP marking and bandwidth sharing at an edge router; the packets will first be classified based on IP address, ports, etc. So, the tc set-up would be something like: Incoming packets ---> Classifier (u32 filter) ---> DSCP marking (dsmark) ---> schedule (e.g., HTB) I am a little confused on how to schedule packets into appropriate HTB class after dsmark?? Or is there an alternate way? Any comments/suggestions are welcome. Thank you Regards Kaustubh ----------------------- PhD student ECE Dept., Virginia Tech ------------------------- _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/