From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stef Coene Date: Tue, 03 Dec 2002 10:29:00 +0000 Subject: Re: [LARTC] Multiple classes Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org On Tuesday 03 December 2002 06:49, Homer Parker wrote: > I'm trying to implement something similar the the diagram in section > 9.5.2.1 in the LARTC HOWTO, but must have missed something somewhere :( > I'm trying to hack up wondershaper, as it looked like a good place to > start.. Here's where I currently at, but I've tried alot of different > things, all failing, some worse than others. The end result is to throttle > back 126 IP's individually. I've read so much over the last few days, I've > almost confused myself, and probably have ;) Thanks for any and all help! > > tc qdisc add dev $DEV0 root handle 1: htb default 20 > > tc class add dev $DEV0 parent 1: classid 1:1 htb rate 128kbit \ > burst 6k > > tc class add dev $DEV0 parent 1:1 classid 2: htb rate 128kbit \ > burst 6k All class attached to the same qdisc have the same major number. Numbering of classes and qdiscs : :. 2: is a valid name for a qdisc, but not for a class. Stef -- stef.coene@docum.org "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/