From mboxrd@z Thu Jan  1 00:00:00 1970
From: =?ISO-8859-1?Q?Bj=F6rn_Snippe?= <bjoern@snippe.de>
Date: Mon, 27 Jan 2003 17:57:02 +0000
Subject: Re: [LARTC] ingress/egress shaping
Message-Id: <marc-lartc-104369031802182@msgid-missing>
List-Id: <lartc.vger.kernel.org>
References: <marc-lartc-104368601427650@msgid-missing>
In-Reply-To: <marc-lartc-104368601427650@msgid-missing>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
To: lartc@vger.kernel.org

David Boreham wrote:
> Repeat: queueing is done on outbound interfaces.

Got it. :)
[...]
> I'd recommend that you setup a test machine with the tc
> stuff on it, and play around for a while. It's much easier
> to understand this stuff by performing experiments, using
> tcpdump , looking at the stats output from tc, and so on.

My 'test machine' is the up-and-running router for the dorm where I live=20
in :)
It's running fine, and all the basic stuff works like I think it should,=20
I just want to make sure I'm not wasting lots of performance by using a=20
silly configuration...
Thanks a lot for reassuring me,

Bj=F6rn

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/