From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Martin A. Brown" Date: Tue, 28 Jan 2003 05:27:36 +0000 Subject: Re: [LARTC] IMQ and outgoing traffic. Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Leszek, : Configuring IMQ for egress traffic, it is not possible : to specify interfaces which we want use to shape. I'm afraid I'll have to disagree! :) Try adding the "-o interface" flag to your iptables command to select based on the output interface. Instead of: iptables -t mangle -A POSTROUTING -j IMQ Use: iptables -t mangle -A POSTROUTING -o eth0 -j IMQ iptables -t mangle -A POSTROUTING -o eth1 -j IMQ iptables -t mangle -A POSTROUTING -o eth2 -j IMQ As long as you don't write an iptables command which matches packets leaving eth3 (and directs them to IMQ), you should have what you desire. -Martin -- Martin A. Brown --- SecurePipe, Inc. --- mabrown@securepipe.com _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/