From mboxrd@z Thu Jan 1 00:00:00 1970 From: zarkdav@eddy.easynet.fr (Benjamin Ryzman) Date: Wed, 29 Jan 2003 11:04:51 +0000 Subject: [LARTC] Multipath routing with different bandwidth and cost Message-Id: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Hi, My workstation is connected to a LAN with two different gateways. GW1 is rate-limited to 2Mbps while GW2 is unlimited. Routing through GW1 is cheaper, thus I don't want to be using only GW2. At any given time, I would like to be able to use GW1 while keeping it uncongestioned and to use GW2 for the remaining traffic. I know I can create a weighted multipath route but I believe the weight doesn't allow me to specify the rate-limitation of GW1. Do you think I can come to a solution using iproute2, netfilter and tc? Regards, Benjamin _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/