From mboxrd@z Thu Jan  1 00:00:00 1970
From: Srikanth W <srikanth_w@naturesoft.net>
Date: Wed, 05 Feb 2003 05:57:34 +0000
Subject: [LARTC] cbq.init for one port on a subnet
Message-Id: <marc-lartc-104442465412418@msgid-missing>
List-Id: <lartc.vger.kernel.org>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: lartc@vger.kernel.org

Sub:[LARTC] cbq init for one port on a subnet

Hello,

We use cbq.init to limit bandwidth.  It works great on a per-user basis.
Now  I'd like to limit traffic from a netblock to the Internet on port
6699.

Network is 192.168.0.160  mask 255.255.255.224
eth0 is the gateway
eth1 connects the netblock in question

Is this the proper syntax;

DEVICE=eth0,10Mbit,1Mbit
RATE0Kbit
WEIGHTKbit
PRIO=5
RULEf99 192.168.0.160/27,


Thanks!

Scott

Hi! Scott,

Your Config. file s'd be 

DEVICE=eth0,10Mbit,1Mbit
RATE0Kbit
WEIGHTKbit
PRIO=5
RULE2.168.0.160/27:6699

like this & try.

Good Luck.

Srikanth.

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/