From mboxrd@z Thu Jan 1 00:00:00 1970 From: "S Mohan" Date: Fri, 07 Feb 2003 02:28:43 +0000 Subject: RE: [LARTC] API using cbq / tc ? Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org First is better as it will not involve changing package if tc changes or some changes are made to tc. Is your GUI X based or web based? Mohan -----Original Message----- From: lartc-admin@mailman.ds9a.nl [mailto:lartc-admin@mailman.ds9a.nl] On Behalf Of Srikanth Sent: Thursday, February 06, 2003 6:38 PM To: lartc@mailman.ds9a.nl Cc: stef.coene@docum.org Subject: [LARTC] API using cbq / tc ? Hi! I'm developing some API functions using cbq / tc (for GUI based BW Management) By two approches i can do this, 1. By excuting cbq.init script (which is executable) using some system calls like execv etc. Are there any problems by doing so? OR 2. Directly using iproute2/tc source code with slight modifications. So, Which option is better? Are there any other solutions, please welcome. thanks & regards, Srikanth. _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/ _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/