From mboxrd@z Thu Jan 1 00:00:00 1970 From: Brad Davidson Date: Thu, 13 Feb 2003 23:44:38 +0000 Subject: Re: [LARTC] HTB debug info in kernel log Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org On Thu, 13 Feb 2003 at 11:46:55, Stef Coene wrote: > > I used htb.init (http://freshmeat.net/projects/htb.init/) to make my > rules, > > so I'm pretty sure they should be OK. > But still you can configure a class with a too low rate. I know. I've seen one error message in the past regarding a too-low rate, but I have since reconfigured my rules, and haven't seen any warnings since. I don't have any classes set with really low rates - 256kb/sec is the lowest. > Devik? Debug problems? How about a sub-option on the HTB config option to enable/disable debugging, as opposed to a #DEFINE in the source? Or maybe just a comment as to why it's printing all this :P _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/