From mboxrd@z Thu Jan 1 00:00:00 1970 From: Emmanuel Guiton Date: Fri, 21 Feb 2003 15:59:05 +0000 Subject: Re: [LARTC] Test tool - traffic generator. Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org > > >What do you mean by "wants to resolve the remote address" ? > I mean that the only packets sent on the network are ARP packets like these ones for example: 02/21-16:27:07.393165 ARP who-has 10.0.0.25 tell 10.10.10.11 02/21-16:27:08.393168 ARP who-has 10.0.0.25 tell 10.10.10.11 10.10.10.25 is the fake address I used and 10.10.10.11 is the emitting station. > >I can send UDP packets to addresses which have no node listening >with ttcp just fine. > >I can send UDP packets to a broadcast address with ttcp too. > > You make me dream. I hope I'm just misusing ttcp because I despair of finding the right soft. >Can you post an example of you trying and whatever failure you see ? > > > Sure: I used the example from the README file. ./ttcp4 -t -s 10.0.0.25 On my second station I get the ARP packets above. On the emitting station, ttcp quit after a while with these messages: ttcp-t: connect: No route to host Segmentation fault Any clue? Emmanuel who is seeing the bright light of hope _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/