From mboxrd@z Thu Jan 1 00:00:00 1970 From: Emmanuel Guiton Date: Fri, 21 Feb 2003 16:36:10 +0000 Subject: Re: [LARTC] Test tool - traffic generator. Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Martin A. Brown wrote: > : > 02/21-16:27:07.393165 ARP who-has 10.0.0.25 tell 10.10.10.11 > : Clearly if you are sending on a LAN then you will need to > : make a fake ARP cache entry for your non-existent node. > : see: man arp > >I agree with David....see also: > > http://linux-ip.net/html/tools-arp.html > > http://linux-ip.net/html/tools-ip-neighbor.html > http://linux-ip.net/html/tools-ip-neighbor.html#ex-tools-ip-neighbor-add > >If you enter an address into the ARP cache (neighbor table) for >10.10.10.11 on 10.0.0.25, the linux box will know where to send the >frames. > >Then, you can flood your network with UDP packets to an IP that isn't on >the wire. This will allow you to exercise your traffic control. > >-Martin > > > You're right. It's working fine now. Thanks to both of you. Emmanuel who's enlighted now (at least a bit). _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/