From mboxrd@z Thu Jan 1 00:00:00 1970 From: Lars Landmark Date: Wed, 26 Feb 2003 19:19:43 +0000 Subject: Re: [LARTC] module HTB Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org On Wed, 26 Feb 2003, Stef Coene wrote: > > [root@jabba iproute2.lars]# ./tc/tc qdisc add dev eth1 root handle 1: htb > > default 10 > > [root@jabba iproute2.lars]# /sbin/lsmod > > Module Size Used by Not tainted > > sch_htb 3872 0 (autoclean) (unused) > > 3c59x 28520 2 > > > > Is it possible that I have a wrong tc-tool?? > No. > > > However if I had wrong > > tc-tool, then why is sch_htb module loaded??? > Have you compiled the htb qdisc as module? If you did, that's why it's > loaded. Thanks for your patience for my novice question.. :-) Yes I have compiled HTB as module and I am using 2.4.20 kernel. My question is, why do I see "unused" when I configure HTB, but not when configure cbq... How can I check that HTB has been loaded properly. And what to do next, if it has not?? Regards Lars Student _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/