From mboxrd@z Thu Jan 1 00:00:00 1970 From: Julian Anastasov Date: Tue, 04 Mar 2003 23:30:11 +0000 Subject: Re: [LARTC] ip rule nat Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Hello, On 4 Mar 2003, Esteban Ribicic wrote: > when doing somehitng like > ip rule add fwmark 3 nat 200.42.75.183 table ppp0 prio 1 > (the idea is that packets that match the fwmark 3 change their source > address to 200.42.75.183)..it first apply the nat and then routes to > table ppp0 right? > in such case the, nat, why may be nat not being applyed? > cause it doesnt work at all..it goes to that interface but does not nat > the src address of the package. > any idea? It is not supported but there is a patch: http://www.ssi.bg/~ja/#rtmasq Regards -- Julian Anastasov _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/