[LARTC] htb parameter problem

["liang jian" <liang_7902@yahoo.com.cn>]

[-- Attachment #1: Type: text/plain, Size: 1280 bytes --]


 

So I do that:

....................

tc class add dev eth1 parent 30:100 classid 30:1000 htb rate 12800kbps ceil 51200kbps prio 1
tc qdisc add dev eth1 parent 30:1000 sfq

...................

tc -s -d class ls dev eth1

class htb 30:100 parent 30:10 rate 200Mbit ceil 400Mbit burst 263690b/8 mpu 0b cburst 525808b/8 mpu 0b level 5
 Sent 53850 bytes 719 pkts (dropped 0, overlimits 0)
 lended: 0 borrowed: 0 giants: 0
 tokens: 8239 ctokens: 8216

class htb 30:1000 parent 30:100 leaf 8012: prio 1 quantum 200000 rate 100Mbit ceil 400Mbit burst 132644b/8 mpu 0b cburst 525808b/8 mpu 0b level 0
 Sent 13944 bytes 116 pkts (dropped 0, overlimits 0)
 lended: 116 borrowed: 0 giants: 0
 tokens: 8287 ctokens: 8216


How to do obtain below result:



I read from www.docum.org have problem about parameter:

Frist :

The same story goes for ceil and cburst, you don't want the class to send more packets then it's ceil allows. So removing the cburst is a good choice for that case. 

Second:

Packets that are sent when the class is allowed to send, are still matched against rate/ceil/burst/cburst. So a big quantum will not create bursts if you don't allow it with the burs/cburst parameters. 



---------------------------------
Do You Yahoo!?
"用雅虎搜索，找到关于奥斯卡的一切"

[-- Attachment #2: Type: text/html, Size: 1728 bytes --]