From mboxrd@z Thu Jan 1 00:00:00 1970 From: =?iso-8859-1?Q?Jose_Luis_Pradas_Ad=E1n?= Date: Tue, 11 Mar 2003 21:15:29 +0000 Subject: [LARTC] some problems with the tc command MIME-Version: 1 Content-Type: multipart/mixed; boundary="----=_NextPart_000_0047_01C2E824.1B3A7DC0" Message-Id: List-Id: To: lartc@vger.kernel.org This is a multi-part message in MIME format. ------=_NextPart_000_0047_01C2E824.1B3A7DC0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Hello everyone! I have some problems with the tc command.=20 I write the same commands as in the manual but it gives me an error. I = write: "tc qdisc add dev eth0 root handle 1:0 cbq bandwidth 100Mbit = avpkt 1000" for example but it doesn't work. I have similar problems = with "tc qdisc add dev eth0 root handle 1: prio" I don't find the solution. I have the 2.4.18 kernel version.=20 Does anyone know why it doesn't work properly? Regards to all and thank you in advance! ------=_NextPart_000_0047_01C2E824.1B3A7DC0 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable

Hello everyone!

I have some problems with the tc = command.=20

I write the same commands as in the = manual but it=20 gives me an error. I write: "tc qdisc add dev eth0 root = handle 1:0=20 cbq bandwidth 100Mbit avpkt 1000" for example but = it doesn't=20 work. I have similar problems with "tc qdisc add = dev eth0=20 root handle 1: prio"

I don't find the = solution. I have the=20 2.4.18 kernel version.

Does anyone know why it doesn't work=20 properly?

Regards to all and thank you in=20 advance!

------=_NextPart_000_0047_01C2E824.1B3A7DC0-- _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/