From: Dhirendra Pal Singh <list@actiswitch.com>
To: lartc@vger.kernel.org
Subject: [LARTC] ABout Routing..diag fixed..
Date: Thu, 13 Mar 2003 01:28:30 +0000 [thread overview]
Message-ID: <marc-lartc-104751819608701@msgid-missing> (raw)
Thanks to David and Martin,
Okay I am copying the diagram again.. I remade it in acsi and replaced
the tabs with space.Have tested it on my box by sending the email to
myself and another box. It looks fine..
I hope it dosent breaks this time
eth 0 192.168.1.50
\
|----------| \ |--------------|
-----------------| gateway 1|-------------------------|gateway2 |
/|_______ |\ |--------------|
/ \ / \
eth0 eth1 - / \
61.X.X.X 192.168.1.1 eth1
eth2
(public) | 192.168.2.51
192.168.3.52
| |
------------ |
| BOX 1 |
-----------------
------------- | Box
3 |
192.168.1.101
---------------
192.168.3.101
My Problem is
A) I am unable to ping from Box 3 (192.168.3.101) to Box
1(192.168.1.101). Any comments or reasons why?
B) I have figured out that if I enable Masquerading then problem A is
solved. Can someone explain why?
C) Is it possible without Masquerading ?
I am in a fix and any Help would be very much appreciated...??
Thanks and Regards
Dp
Dhirendra Pal Singh wrote:
> Hi All..
> I think the image got screwed up...
> I am giving the description again..
>
> Dsl feed goes to gateway 1. Its internal ip address is of
> 192.168.1.XXX. Now from here goes the feed to another gateway which
> eth0 ip address is 192,168.1.50. It has 2 more eth - eth1 and eth2.
> Their ip address are 192.168.2.51 and 192.168.3.XXX respectively.
> Now my problem is that all the computers connect to 192.168.2.XXX are
> unable to point to the computers of 192.168.1.XXX. Though strangely I
> can ping to 192.168.1.1 wich is the internal ip address of the gateway 1.
>
> Can someone help me whith this configuration...?
> rest question are below..
> Thanks in advance ..
> dp
>
> Dhirendra Pal Singh wrote:
>
>> Hi All,
>> I have the following setup on redhat linux 8.0 ...
>>
>> eth 0
>> 192.168.1.50
>> \
>> |--------------| \
>> |--------------|
>> -----------------| gateway 1|-------------------------|gateway2 |
>> /|_______ |\
>> |--------------|
>> / \
>> / \
>> eth0 eth1 -
>> / \
>> 61.X.X.X 192.168.1.1 eth1
>> eth2
>> (public) |
>> 192.168.2.51 192.168.3.52
>> |
>> |
>> ------------
>> |
>> | BOX 1
>> |
>> ----------------
>> -------------
>> | Box
>> BOX 3 |
>>
>> 192.168.1.101 ---------------
>>
>> 192.168.3.101
>>
>> My Problem is
>>
>> A) I am unable to ping from Box 3 (192.168.3.101) to Box 1. Any
>> comments or reasons why?
>> B) I have figured out that if I enable Masquerading then problem A is
>> solved. Can someone explain why?
>> C) Is it possible without Masquerading ?
>>
>> I am in a fix and any Help would be very much appreciated...??
>>
>> Thanks and Regards
>> Dp
>>
>>
>>
>> _______________________________________________
>> LARTC mailing list / LARTC@mailman.ds9a.nl
>> http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
>>
>>
>
>
> _______________________________________________
> LARTC mailing list / LARTC@mailman.ds9a.nl
> http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
>
>
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
next reply other threads:[~2003-03-13 1:28 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-03-13 1:28 Dhirendra Pal Singh [this message]
2003-03-13 8:56 ` [LARTC] ABout Routing..diag fixed Ben Clewett
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=marc-lartc-104751819608701@msgid-missing \
--to=list@actiswitch.com \
--cc=lartc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.