From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stef Coene Date: Fri, 14 Mar 2003 22:21:22 +0000 Subject: Re: Re[6]: [LARTC] CBQ Traffic control not working Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org On Thursday 13 March 2003 22:01, Mugur TOMITA wrote: > The filters are there... if you take a closer look you'll that my > copy/paste was falty... > > But I can tell you I solved the problem. I attched my solution below. > Stef, you are right, my filters are not working... > In fact I don't konow what I did wrong: > for marking packets depending on their source I used > ipchains -A output -p all -s 192.168.1.0/30 -m 1 > and the filters look like > tc filter add dev eth0 parent 1:0 protocol ip prio 1 handle 1 fw > classid 1:8 Could it be the fact that I made the marking on the output > chains and not on the input chain? Yes. If you nat, the source address is rewritten to the address of your firewall. Stef -- stef.coene@docum.org "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/