From mboxrd@z Thu Jan  1 00:00:00 1970
From: Kim Jensen <kimj@dawn.dk>
Date: Wed, 26 Mar 2003 11:03:16 +0000
Subject: Re: [LARTC] howto equalize two uplink?
Message-Id: <marc-lartc-104867662532661@msgid-missing>
List-Id: <lartc.vger.kernel.org>
References: <marc-lartc-104867316529270@msgid-missing>
In-Reply-To: <marc-lartc-104867316529270@msgid-missing>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
To: lartc@vger.kernel.org

Hi Kert=E9sz,

Read this doc:

http://www.ssi.bg/~ja/nano.txt

/Kim

On Wednesday 26 March 2003 11:04, Kert=E9sz Viktor wrote:
> Hi all,
>
> I've read all howtos at lartc.org but I still don't know how to share
> packets between two uplinks. I used iptables/ROUTE target which works on
> router box. In this case I can't use that because this box do masquerading
> and i can't match destination ip at the prerouting chain in mangle table.
> Is there a solution to specify two gateway to a destination?
>              problem
>
>                  V
> ---if1--linux gw---if2-----switch--router1-----link1----  10.5.0.0/16
> clients
>                                              \----router2-----link2----/
> if2: 10.0.1.1
> router1: 10.0.1.6
> router2: 10.0.1.8
>
> I tried these but I think I don't really understand iproute.
>
> ip add 10.5.0.0/16 via 10.0.1.6 via 10.0.1.8 equalize
> nor
> ip add 10.5.0.0/16 nexthop 10.0.1.6 weight 1 nexthop 10.0.1.8 weight 1
> equalize (i know, this is syntax error)
>
> I hope I don't have to recompile my kernel... :) Thanks in advance!
>
> Viktor
>
> _______________________________________________
> LARTC mailing list / LARTC@mailman.ds9a.nl
> http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/