From mboxrd@z Thu Jan 1 00:00:00 1970 From: =?iso-8859-2?Q?Kert=E9sz_Viktor?= Date: Wed, 26 Mar 2003 13:00:55 +0000 Subject: Re: [LARTC] howto equalize two uplink? Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Hi Kim, > > Read this doc: > > http://www.ssi.bg/~ja/nano.txt Thanks. I had successfully set up that each connection is estabilished on other line but it's not an optimal solution for me. Is there a way I can route 50% of traffic put on 1 line? It would be good for me if every second packet would go on the second line. Thanks! Viktor > > I've read all howtos at lartc.org but I still don't know how to share > > packets between two uplinks. I used iptables/ROUTE target which works on > > router box. In this case I can't use that because this box do masquerading > > and i can't match destination ip at the prerouting chain in mangle table. > > Is there a solution to specify two gateway to a destination? > > problem > > > > V > > ---if1--linux gw---if2-----switch--router1-----link1---- 10.5.0.0/16 > > clients > > \----router2-----link2----/ > > if2: 10.0.1.1 > > router1: 10.0.1.6 > > router2: 10.0.1.8 > > _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/