From mboxrd@z Thu Jan 1 00:00:00 1970 From: David Reoch Date: Fri, 28 Mar 2003 22:24:45 +0000 Subject: [LARTC] How to use the tc -s [statistics] option? Message-Id: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Hi, I've tried every combination (except the RIGHT one, of course) to see what the tc cbq statistics are. I really just want to see what it's doing - I'm trying to rate limit napster/peer2peer apps, but they still seem to be hogging up all of my T1 bandwidth. Here's my tc config rules, minus the long list of ports in the class: tc qdisc del dev eth0 root [eth0 is the Internet facing interface] tc qdisc add dev eth0 root handle 1 cbq bandwidth 10Mbit avpkt 1000 cell 8 tc class change dev eth0 root cbq weight 1Mbit allot 1514 tc qdisc del dev eth1 root [eth1 is the intranet facing interface] tc qdisc add dev eth1 root handle 1 cbq bandwidth 10Mbit avpkt 1000 cell 8 tc class change dev eth1 root cbq weight 1Mbit allot 1514 tc class add dev eth1 parent 1: classid 1:50 cbq bandwidth 10Mbit rate 35Kbit weight 3Kbit prio 5 allot 1514 cell 8 maxburst 20 avpkt 1000 bounded tc qdisc add dev eth1 parent 1:50 handle 50 tbf rate 35Kbit buffer 10Kb/8 limit 15Kb mtu 1500 tc filter add dev eth1 parent 1:0 protocol ip prio 100 u32 match ip sport 1755 0xffff match ip dst 0/0 classid 1:50 tc filter add [etc....] same filter adds for eth0 Thank you for assistance, dave@warpspeed.net _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/