From mboxrd@z Thu Jan 1 00:00:00 1970 From: N N Ashok Date: Sun, 06 Apr 2003 20:14:19 +0000 Subject: Re: [LARTC] Ethernet card interrupt conflict Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On Sunday 30 March 2003 17:20, yuxiao jia scrawled: > Hello all > > I install 4 ethernet card in my Linux router. When I use > > cat /proc/interrupt it show me two interface use same IRQ > > ...11:...........eth0 and eth2 > > I want to know how I can modify the eth0 to another unsued IRQ or avoid > this things happen > > Thanks > > Regrads > > yuxiao > I also have such an entry in my /proc/interrupts. 11: 423024 XT-PIC eth2, eth3 They are on a 4-port Ethernet card. Also does this have any negative effect on the performance? Just curious, cos everything seems to be working fine for me now. Thanks, Ashok - -- - ----------------------------------------------------------------------------- My public key: gpg --recv-keys --keyserver blackhole.pca.dfn.de DCB44F2E - ----------------------------------------------------------------------------- "...there is nothing so unnatural as the commonplace." Sir Arthur Conan Doyle in "Adventures of Sherlock Holmes: A Case of Identity" - ----------------------------------------------------------------------------- -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.7 (GNU/Linux) iD8DBQE+kIqbRhXpVty0Ty4RAgc9AJ95G3JfB23ewqMkbv/Jh+XDXnh0VACfYdZ9 PmbMV8dCBVo4bWLE6zcllyg=G7yX -----END PGP SIGNATURE----- _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/