From mboxrd@z Thu Jan 1 00:00:00 1970 From: Srikanth Date: Tue, 08 Apr 2003 09:36:20 +0000 Subject: Re: [LARTC] BW using CBQ/tc for VPN Ipsec i/f? MIME-Version: 1 Content-Type: multipart/mixed; boundary="------------030705000906030202000409" Message-Id: List-Id: References: In-Reply-To: To: lartc@vger.kernel.org --------------030705000906030202000409 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Stef Coene wrote: >On Monday 07 April 2003 13:41, Srikanth wrote: > > >>How about, if i shall use tc / iproute2 ? >> >> >cbq.init uses tc But it makes configuring tc more easy because you can use >simple config files. > >Stef > > It's OK., my question was about, if i use tc, shall i need to pass ipsec protocol / port number as arguments? i mean, Is there any mechanism to recognize ipsec packets / VPN tunnels. Srikanth. > > >>Srikanth. >> >>hare ram wrote: >> >> >>>if you are using the cbq.init script yes it works >>> >>>hare >>>----- Original Message ----- >>> >>> >>From: "Srikanth" >> >> >> >>>To: >>>Sent: Monday, April 07, 2003 2:45 PM >>>Subject: [LARTC] BW using CBQ/tc for VPN Ipsec i/f? >>> >>> >>> >>>>Hi all, >>>> >>>>I want to allocate bandwidth for ipsec interface using CBQ/tc. >>>>Suppose the conf. file is like this, >>>> >>>>DEVICE=ipsec0,10Mbit,1Mbit >>>>RATE=128Kbit >>>>WEIGHT=10Kbit >>>>PRIO=5 >>>>RULE=192.128.1.0/24 >>>> >>>>Does it work >>>>or >>>>What else options need to be taken care like ipsec packets/protocol/port >>>># etc.? >>>>C'd anybody suggest please? >>>> >>>>regds, >>>>Srikanth. >>>> >>>> >>>>_______________________________________________ >>>>LARTC mailing list / LARTC@mailman.ds9a.nl >>>>http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/ >>>> >>>> > > > --------------030705000906030202000409 Content-Type: text/html; charset=us-ascii Content-Transfer-Encoding: 7bit


Stef Coene wrote:
On Monday 07 April 2003 13:41, Srikanth wrote:
  
How about, if i shall use tc / iproute2 ?
    
cbq.init uses tc  But it makes configuring tc more easy because you can use 
simple config files.

Stef
It's OK., my question was about, if i use tc, shall i need to pass ipsec protocol / port number as arguments?
i mean, Is there any mechanism to recognize ipsec packets / VPN tunnels.

Srikanth.
  
Srikanth.

hare ram wrote:
    
if you are using the cbq.init script yes it works

hare
----- Original Message -----
      
From: "Srikanth" <srikanth_w@naturesoft.net>

    
To: <lartc@mailman.ds9a.nl>
Sent: Monday, April 07, 2003 2:45 PM
Subject: [LARTC] BW using CBQ/tc for VPN Ipsec i/f?

      
Hi all,

I want to allocate bandwidth for ipsec interface using CBQ/tc.
Suppose the conf. file is like this,

DEVICE=ipsec0,10Mbit,1Mbit
RATE=128Kbit
WEIGHT=10Kbit
PRIO=5
RULE=192.128.1.0/24

Does it work
or
What else options need to be taken care like ipsec packets/protocol/port
# etc.?
C'd anybody suggest please?

regds,
Srikanth.


_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

--------------030705000906030202000409-- _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/