From mboxrd@z Thu Jan 1 00:00:00 1970 From: Hocking James A Date: Mon, 14 Apr 2003 13:56:33 +0000 Subject: RE: [LARTC] problem with IMQ Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org > -----Original Message----- > From: hare ram [mailto:hareram@sol.net.in] > Sent: 14 April 2003 15:01 > To: lartc@mailman.ds9a.nl > Subject: [LARTC] problem with IMQ > > > Hi all > > > iam working with Bridge with Linux RH 8.0 > when i making sample config in the document, iam getting > following error > could some one point me what is wrong > > i have patched the kernel and make also > i have rebooted with new kernel > but iam getting the folloing error > > [root@bridge root]# modprobe imq numdevs=1 > [root@bridge root]# tc qdisc add dev imq0 handle 1: root htb > default 1 > [root@bridge root]# tc class add dev imq0 parent 1: classid > 1:1 htb rate > 1mbit > [root@bridge root]# tc qdisc add dev imq0 parent 1:1 handle > 10: htb default > 5 > [root@bridge root]# tc class add dev imq0 parent 10: handle > 10:1 htb rate > 256kbit burst 30k prio 1 > Error: Qdisc "handle" is classless. This last line should be: tc class add dev imq0 parent 10: classid 10:1 htb rate 256kbit burst 30k prio 1 ^^^^^^^ James The Information contained in this E-Mail and any subsequent correspondence is private and is intended solely for the intended recipient(s). For those other than the recipient any disclosure, copying, distribution, or any action taken or omitted to be taken in reliance on such information is prohibited and may be unlawful. Emails and other electronic communication with QinetiQ may be monitored. Calls to our Customer Contact Centre may be recorded for quality control, regulatory and monitoring purposes. _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/