From mboxrd@z Thu Jan 1 00:00:00 1970 From: Frank v Waveren Date: Mon, 14 Apr 2003 22:06:27 +0000 Subject: [LARTC] a simple setup with tbf and prio? Message-Id: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org I'm trying to make a fairly average setup, I want to limit eth1 to 100kbit, and then prioritize things like ACK's and interactive traffic. All the scripts I see do this with CBQ, however given the description of it in the HOWTO, I think I'd be much happier having the limiting done by a TBF. So what I'd like is to have the root qdisc be TBF, and put a PRIO qdisc under this. However, from what I understand, I can't put anything as a child under a TBF, not even a single other qdisc because it's classless. Why is this? The concept of having a bandwidth limiting qdisc as the root and putting prio queues under that makes sense right? Also, in the trivia section: Why won't the PRIO qdisc allow me to set less than 2 bands? -- Frank v Waveren Fingerprint: 21A7 C7F3 fvw@[var.cx|stack.nl|chello.nl] ICQ#10074100 1FF3 47FF 545C CB53 Public key: hkp://wwwkeys.pgp.net/fvw@var.cx 7BD9 09C0 3AC1 6DF2 _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/