From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stef Coene Date: Tue, 15 Apr 2003 16:51:24 +0000 Subject: Re: [LARTC] IMQ+HTB problem Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org > > Never add a htb qdisc to a htb class. It will only add extra delays. > WHAT IS RECOMENDED Only use classes. You don't need the qdiscs. > > > iptables -t mangle -A POSTROUTING -p tcp --dport 80 -j IMQ > > > Chain POSTROUTING (policy ACCEPT 121733 packets, 17224986 bytes) > > > pkts bytes target prot opt in out source > > > destination > > > > Euh. Where is your iptables command ???? > > YES IAM WONDERING WHERE IS THE RULE GONE, THIS IS WHAT MAIN PROBLEM, SEE > ABOVE I HAVE EXECUTED THE IPTABLE LINE I know. Are you sure you can execute the iptables command and you didn't had any errors? If I do this on my box (I just did iptables -t mangle -A POSTROUTING -p tcp --dport 80) and get a list of the iptables rules, I can see the rule I added. So it works. Can you check it again ? Stef -- stef.coene@docum.org "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/