All of lore.kernel.org
 help / color / mirror / Atom feed
From: "hare ram" <hareram@sol.net.in>
To: lartc@vger.kernel.org
Subject: [LARTC] IMQ Setup-- first example
Date: Sat, 19 Apr 2003 08:44:12 +0000	[thread overview]
Message-ID: <marc-lartc-105074185223452@msgid-missing> (raw)

Hi all

thanks to Mr Devik , Mr Stef, Mr Patrick

At last iam able to successfully compiles with RH 9.0 with Iptables 1.2.8
with IMQ
not all are working fine with out any Errors, and iam able to see the
traffic on IMQ Interface, when i mark the packets

on test base i have made a small example below, need confirmation

below example, iam trying to control up+down= 128kbps for the ip of x.x.x19

when try to download from internet, i was getting approximately 18.3Kil0
bytes

when i try up load the same time, to one of my local FTP server, which is
located out side my LAN
iam able to transfer the rate of 14Kilo Bytes, and the download speed
decreased to 4+ kilo bytes

so i assume my setup is running perfectly both the ways, but i did not use
postrouting..... i have used only prerouting...

my setup is like this
                                                                            
    ----- FTP Server
LAPTOP--Switch--Eth1(Bridge)Eth0---Switch ---|
                                                                            
    -----Internet



modprobe imq numdevs=1

 tc qdisc add dev imq0 handle 1: root htb default 1
 tc class add dev imq0 parent 1: classid 1:1 htb rate 1mbit

 tc qdisc add dev imq0 parent 1:1 handle 10: htb default 5
 tc class add dev imq0 parent 10: classid 10:1 htb rate 128kbit burst 3k
prio 1
 tc class add dev imq0 parent 10: classid 10:2 htb rate 128kbit burst 3k
prio 2
 tc class add dev imq0 parent 10: classid 10:5 htb rate 1mbit prio 3

 tc qdisc add dev imq0 parent 10:1 handle 21:0 sfq
 tc qdisc add dev imq0 parent 10:2 handle 22:0 sfq
 tc qdisc add dev imq0 parent 10:5 handle 23:0 sfq

 tc filter add dev imq0 protocol ip pref 1 parent 10: handle 1 fw classid
10:1
 tc filter add dev imq0 protocol ip pref 2 parent 10: handle 2 fw classid
10:2

 iptables -t mangle -A PREROUTING -i eth1 -j IMQ --todev 0
 iptables -t mangle -A PREROUTING -i eth1 -s x.x.x.19 -j MARK --set-mark 1

 ip link set imq0 up


so is this setup correct, i need to make some more correction, please
suggest

thanks
hare


_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

             reply	other threads:[~2003-04-19  8:44 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2003-04-19  8:44 hare ram [this message]
2003-04-21  9:42 ` [LARTC] IMQ Setup-- first example hare ram

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=marc-lartc-105074185223452@msgid-missing \
    --to=hareram@sol.net.in \
    --cc=lartc@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.