From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stef Coene Date: Sun, 20 Apr 2003 22:01:52 +0000 Subject: Re: [LARTC] Rshaper-2.01 issue with Linux8.0 Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org On Sunday 20 April 2003 12:41, Tushar Gupta wrote: > I have looked at tc and information on www.docum.org earlier too. I have > a feeling that it is going to take a lot of time before I become > comfortable with tc/htb/cbq, and understand all its nuiances. > > I am looking forward to some quick and maybe not so good solution as > directly working with tc. With rshaper I just needed to specify IP and > amount of max bandwidth I want to allocate to the host, and I am up and > running. If you want to do only that, that's not soo difficult. Using htb is easy if you copy a working script. Of course, you need to read some docs to understand how it works. But it's not that difficult if you don't care about the fine tuning options. Stef -- stef.coene@docum.org "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/