From mboxrd@z Thu Jan  1 00:00:00 1970
From: Stef Coene <stef.coene@docum.org>
Date: Mon, 21 Apr 2003 19:33:52 +0000
Subject: Re: [LARTC] filters not doing anything?
Message-Id: <marc-lartc-105095374519972@msgid-missing>
List-Id: <lartc.vger.kernel.org>
References: <marc-lartc-105078585814903@msgid-missing>
In-Reply-To: <marc-lartc-105078585814903@msgid-missing>
MIME-Version: 1.0
Content-Type: text/plain; charset="windows-1252"
Content-Transfer-Encoding: quoted-printable
To: lartc@vger.kernel.org

On Monday 21 April 2003 16:04, Frank v Waveren wrote:
> On Mon, Apr 21, 2003 at 11:20:12AM +0200, Stef Coene wrote:
> > And try this if you want to have a catch all rule :
> > tc filter add dev eth0 parent 1: protocol ip u32 match ip src 0/0 flowid
> > 2:1
>
> Tried that too, the packets still aren't going through the SFQ.
>
> The setup:
> BW=80
> DEV=3Deth1
>
> HBW=3D$(($BW/2))
>
> tc qdisc del dev $DEV root
> tc qdisc add dev $DEV root handle 1: htb r2q 1
> tc class add dev $DEV parent 1: classid 1:1 htb rate ${BW}kbit ceil
> ${BW}kbit tc qdisc add dev $DEV parent 1:1 handle 2: prio bands 4
> tc qdisc add dev $DEV parent 2:1 handle 10: sfq perturb 10 # Lowlatency
> tc qdisc add dev $DEV parent 2:2 handle 20: sfq perturb 10 # Medium Laten=
cy
> tc qdisc add dev $DEV parent 2:3 handle 30: sfq perturb 10 # Regular
> tc qdisc add dev $DEV parent 2:4 handle 40: htb r2q 1      # Bulk
>
> tc class add dev $DEV parent 40: classid 40:1 htb rate ${HBW}kbit ceil
> ${BW}kbit tc class add dev $DEV parent 40: classid 40:2 htb rate ${HBW}kb=
it
> ceil ${BW}kbit tc qdisc add dev $DEV parent 40:1 handle 41: sfq perturb 10
> tc qdisc add dev $DEV parent 40:2 handle 42: sfq perturb 10
>
> tc filter add dev $DEV parent 1: protocol ip prio 1 u32 match ip protocol=
 1
> 0xff flowid 2:1 tc filter add dev $DEV parent 1: protocol ip prio 1 u32
> match ip tos 0x10 0xff flowid 2:1 tc filter add dev $DEV parent 1: protoc=
ol
> ip prio 1 u32 match ip protocol 6 0xff match u8 0x05 0x0f at 0 match u16
> 0x0000 0xffc0 at 2 match u8 0x10 0xff at 33 flowid 2:1 # Small ACKs
>
> tc filter add dev $DEV parent 1: protocol ip prio 2 handle 1022 fw flowid
> 40:1  # Bulk1 tc filter add dev $DEV parent 1: protocol ip prio 2 handle
> 1027 fw flowid 40:2  # Bulk2
>
> tc filter add dev $DEV parent 1: protocol ip prio 3 u32 match ip protocol=
 6
> 0xff match u8 0x10 0xff at nexthdr+13 flowid 2:1  # All ACKs
>
> tc filter add dev $DEV protocol ip parent 1: prio 999 u32 match ip src 0/0
> flowid 2:3  # Anything else goes into the Regular category
But where is your catch all rule to put the packets in the 2:4 band?
And you never put packets in the 2:2 band.

An other question, why do you added that 4 bands prio?  You can do the same=
=20
only with the htb qdisc.

Stef

--=20

stef.coene@docum.org
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.oftc.net

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/