From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Zealous" Date: Thu, 24 Apr 2003 16:30:22 +0000 Subject: Re: [LARTC] compiling iproute Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Hi, Plz install iproute2 package in your system.. if u have redhat then install the rpm it will work Thanks Joel ----- Original Message ----- From: "Lucas Aimaretto" To: Sent: Thursday, April 24, 2003 9:13 PM Subject: Re: [LARTC] compiling iproute > > > Do I need to add any patch to it?. In the case I need to doit, > > > where can I get it from ? > > These options are not available in kernel 2.4.20. I'm not sure what > > you need, but if you want to use, you have to enable the needed > > options onder "QoS and/or fair queueing". > > > > Stef > > What I'm willing to do is to shape traffic over an interface. To do > that, I believe I need the ip command and the tc command, both > included in iproute2, am I right?? > > If so, I need to enable the NETLINK socket, provided by the kernel. > But listen, I may be wrong with all this thinking ... please correct > me. > > Thank you > > Lucas > _______________________________________________ > LARTC mailing list / LARTC@mailman.ds9a.nl > http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/ _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/