From mboxrd@z Thu Jan  1 00:00:00 1970
From: "Awie" <awie@eksadata.com>
Date: Sun, 27 Apr 2003 14:58:36 +0000
Subject: Re: [LARTC] Configuration of CBQ
Message-Id: <marc-lartc-105145551327892@msgid-missing>
List-Id: <lartc.vger.kernel.org>
References: <marc-lartc-105145511127709@msgid-missing>
In-Reply-To: <marc-lartc-105145511127709@msgid-missing>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: lartc@vger.kernel.org

Sorry to forget informing that I used CBQ.init

Thx & Rgds,

Awie

----- Original Message -----
From: "Awie" <awie@eksadata.com>
To: <lartc@mailman.ds9a.nl>
Sent: Sunday, April 27, 2003 10:52 PM
Subject: [LARTC] Configuration of CBQ


> All,
>
> I plan to config my network by using CBQ (Attached the configuration
files).
> I want to do a packet prioritization instead traffic shaping (perhaps in
the
> future I will need it).
>
> The result that I want :
>
> 1. HTTP gets the 1st priority
> 2. SMTP and some other packet get the 2nd
> 3. FTP gets the 3rd
>
> Should I configure the "priority default"? (I did it in Cisco router, last
> time)
>
> Your answer is very appreciated. Many thanks for your help.
>
> Rgds,
>
> Awie
>
>
>
> _______________________________________________
> LARTC mailing list / LARTC@mailman.ds9a.nl
> http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
>

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/