From mboxrd@z Thu Jan 1 00:00:00 1970 From: Girts Folkmanis Date: Fri, 02 May 2003 09:54:39 +0000 Subject: Re: [LARTC] shaping (policing) on a bridge Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Hello! > Policing incoming traffic can be done with the infress qdisc and u32 + > policers. A policer is some sort of tbf in the filter. This is limited in > usage. You can only limit some traffic. > > If you want to shape incoming bandwidth with htb or cbq, you need the ingress > qdisc, or shape the outgoing traffic on the other nic. This can be more > complex, you can share bandwidth between users in a controlled way. Thanks for the answer, but can you point me to what documentation to read to do the shaping on _bridge level_? Lots of information about shaping on IP level are around, but I have found none on the lower level shaping. Best regards, Girts _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/