From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stef Coene Date: Sun, 04 May 2003 09:59:24 +0000 Subject: Re: [LARTC] Traffic priority. Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org On Saturday 03 May 2003 15:53, Alexandru Coseru wrote: > I cannot shape because I have no fixed bandwith.. You still can shape if you don't have a fixed bandwidth. > I mean right now my download goes with 10 kbytes/sec , an hour ago it was > around 50 kbytes/sec... > I have a special kind of deal with my ISP... it all depends on how loaded > my ISP is... Same for me. > So , I can't put 70% for www , cause I don't know what 100% means for me... > > I hope you can understand me.... Yes. But still it can be done. You can create a setup for 10kb/s, but if there is more bandwidth, it will use more. But the 70% for www will always be valid. It is better if you know your maximum speed, but if you don't, you still can shape. Stef -- stef.coene@docum.org "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/