From mboxrd@z Thu Jan 1 00:00:00 1970 From: Patrick =?ISO-8859-1?Q?B=F6rjesson?= Date: Mon, 05 May 2003 14:49:47 +0000 Subject: [LARTC] Setting up an ip-tunnel Message-Id: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable To: lartc@vger.kernel.org I'm totally new to this mailinglist so I apologise for all and any profoundly stupid questions that I ask, but I haven't found what I was looking for anywhere else. Have looked everywhere for this but haven't found any examples that apply to my configuration.=20 I have one computer that sits behind a firewall and another computer with a public IP-address outside the firewall. I would now want to set up an ip-tunnel between these two so that they can communicate "transparently". I'm desperate for this information as I _need_ to be able to access the computer behind the firewall from the the one with a public ip. Would very much appreciate it if you could be as thorough as possible in your explanations.=20 Thanks in advance, Patrick B=F6rjesson _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/