From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stef Coene Date: Mon, 05 May 2003 18:39:09 +0000 Subject: Re: [LARTC] problem with tc filter Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org On Monday 05 May 2003 20:10, miller69@gmx.net wrote: > Hi all, > > i'm running a linux ethernet bridge with HTB and netfilter support. For > the firewalling part i mark some special pakets with -j MARK --set-mark 12 > or --setmark 22. After that i use > > tc filter add dev eth0 parent 1:0 protocol ip prio 4 handle 12 fw classid > 1:12 and > tc filter add dev eth1 parent 2:0 protocol ip prio 4 handle 22 fw classid > 2:22 > > That works very well but at some point of my project i need to switch over > just using one mark (or more exact using just one firewall-rule) for both > filters. So i tried to change the second filter: > > tc filter add dev eth0 parent 1:0 protocol ip prio 4 handle 12 fw classid > 1:12 > tc filter add dev eth1 parent 2:0 protocol ip prio 4 handle 12 fw classid > 2:22 > > That did not work, just the first filter was used but the other never > catched a paket. My question: is there a way to handle this by a mask for > the handle for example? Any hints are very much appreciated! Why not doing tc filter add dev eth1 parent 1:0 protocol ip prio 4 handle 12 fw classid 2:22 Stef -- stef.coene@docum.org "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/