From mboxrd@z Thu Jan 1 00:00:00 1970 From: miller69@gmx.net Date: Mon, 05 May 2003 19:15:07 +0000 Subject: Re: [LARTC] problem with tc filter Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable To: lartc@vger.kernel.org > On Monday 05 May 2003 20:10, miller69@gmx.net wrote: > > That works very well but at some point of my project i need to switch > over > > just using one mark (or more exact using just one firewall-rule) for > both > > filters. So i tried to change the second filter: > > > > tc filter add dev eth0 parent 1:0 protocol ip prio 4 handle 12 fw > classid > > 1:12 > > tc filter add dev eth1 parent 2:0 protocol ip prio 4 handle 12 fw > classid > > 2:22 > > > > That did not work, just the first filter was used but the other never > > catched a paket. My question: is there a way to handle this by a mask > for > > the handle for example? Any hints are very much appreciated! > Why not doing=20 > tc filter add dev eth1 parent 1:0 protocol ip prio 4 handle 12 fw classid > 2:22 I've tried it and the answer was: RTNETLINK answers: Invalid argument So that did not work. Any other ideas? I really need this going! Thanks, Mike. --=20 +++ GMX - Mail, Messaging & more http://www.gmx.net +++ Bitte l=E4cheln! Fotogalerie online mit GMX ohne eigene Homepage! _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/