From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Alexandru Coseru" Date: Mon, 05 May 2003 19:51:47 +0000 Subject: Re: [LARTC] Script problem Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org it worked... thanks.. I'm gonna test it later to see if it really works & shapes the traffic.. One more question though ... Can I add more than 3 (three) bands ? Like: tc qdisc add dev eth1 parent 10:1 handle 20:bfifo tc qdisc add dev eth1 parent 10:2 handle 30:bfifo tc qdisc add dev eth1 parent 10:3 handle 40:bfifo tc qdisc add dev eth1 parent 10:4 handle 50:bfifo of course , i get an error at the last line... but can I do it in another way ? Thanks Alex ----- Original Message ----- From: "Stef Coene" To: "Alexandru Coseru" Cc: Sent: Monday, May 05, 2003 10:08 PM Subject: Re: [LARTC] Script problem > On Monday 05 May 2003 20:42, Alexandru Coseru wrote: > > Yes.. this is the error part: > > > > > > [root@alexcos root]# tc qdisc del dev eth1 root > > [root@alexcos root]# tc qdisc add dev eth1 root handle 10: prio > > [root@alexcos root]# tc qdisc add dev eth1 parent 10:1 handle 20:est 1sec 8 > > sec bfifo > > Unknown qdisc "1sec", hence option "8" is unparsable > > [root@alexcos root]# tc qdisc add dev eth1 parent 10:1 handle 20:est 1 sec > > 8 sec bfifo > > Unknown qdisc "1", hence option "sec" is unparsable > I don't know the syntac for the bfifo qdisc. But what if you simple remove > some parameters : > tc qdisc add dev eth1 parent 10:1 handle 20: bfifo > > > Stef > > -- > > stef.coene@docum.org > "Using Linux as bandwidth manager" > http://www.docum.org/ > #lartc @ irc.oftc.net > > _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/