From mboxrd@z Thu Jan 1 00:00:00 1970 From: Eric Leblond Date: Wed, 07 May 2003 23:25:47 +0000 Subject: [LARTC] teql and gre tunnel Message-Id: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Hi everybody, I want to do the following setup : | | Tun1 - Link 1 | Tun1 | | Router A | teql | INTERNET Link - | | teql |router B | | Tun2 - Link 2 | Tun2 | | This should permit to agregate Link 1 and Link 2 (less the cost of the encapsulation). The two tunnels are GRE ip tunnel. It seems to work fine in theory : I manage to send packet on the teql from one of the node (debian sid with kernel 2.4.20-686). But I've got a problem to put a teql qdisc on the tunnel on one of the node. When doing : tc qdisc add dev tun1 root teql0 I only manage to have an RTnetlink message. But when doing : tc qdisc add dev eth0 root teql0 It works fine. The second router is debian woody based with a from sid backported tc and a 2.4.20 home made kernel. Is there a special requirement to have this working ? BR, -- Eric Leblond _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/