From mboxrd@z Thu Jan  1 00:00:00 1970
From: Sjaak Nabuurs <lvs@vsm-hosting.nl>
Date: Thu, 08 May 2003 13:08:21 +0000
Subject: Re: [LARTC] load balancing
Message-Id: <marc-lartc-105239937611885@msgid-missing>
List-Id: <lartc.vger.kernel.org>
References: <marc-lartc-102512835209719@msgid-missing>
In-Reply-To: <marc-lartc-102512835209719@msgid-missing>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: lartc@vger.kernel.org



Yes it is 

I'm running it over 3 lines very nicely

Just use :

/sbin/ip route add equalize \
            nexthop via $ADSL_GW1 dev $ADSL_IFACE1 weight 1\
            nexthop via $ADSL_GW2 dev $ADSL_IFACE2 weight 1\
            nexthop via $ADSL_GW3 dev $ADSL_IFACE3 weight 1






On Thu, 2003-05-08 at 13:50, Lucas Aimaretto wrote:
> Hi,
> 
> Is it possible to balance load over 2 interfaces ...
> 
> Let say I'm shapping traffic on eth1, and for some reason, eth1 brokes
> down. How do I, dynamically, swap to eth0 so I wont stop my traffic
> going thru the box?
> 
> Am I clear?. Please for give me for my english since it is not my
> native languaje.
> 
> regards
> 
> Lucas
> _______________________________________________
> LARTC mailing list / LARTC@mailman.ds9a.nl
> http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/