From mboxrd@z Thu Jan  1 00:00:00 1970
From: "Kjell Chris Flor" <kjell@mastercad.se>
Date: Fri, 09 May 2003 15:27:36 +0000
Subject: Re: [LARTC] Traffic priority.
Message-Id: <marc-lartc-105249414603402@msgid-missing>
List-Id: <lartc.vger.kernel.org>
References: <marc-lartc-105192322405094@msgid-missing>
In-Reply-To: <marc-lartc-105192322405094@msgid-missing>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: lartc@vger.kernel.org

> > So , I can't put 70% for www , cause I don't know what 100% means for
me...
> >
> > I hope you can understand me....
> Yes.
> But still it can be done.  You can create a setup for 10kb/s, but if there
is
> more bandwidth, it will use more.  But the 70% for www will always be
valid.
> It is better if you know your maximum speed, but if you don't, you still
can
> shape.

This is new to me. Could you explain to me with a small example?

Kjell


_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/