From: "sun reflex4" <sunreflex4@hotmail.com>
To: lartc@vger.kernel.org
Subject: Re: [LARTC] incoming traffic??
Date: Sun, 11 May 2003 10:13:08 +0000 [thread overview]
Message-ID: <marc-lartc-105264809431883@msgid-missing> (raw)
In-Reply-To: <marc-lartc-105258341931128@msgid-missing>
well, I have 2 interfaces, but I didn't get what you mean. You say I use one
for incoming and one for outgoing? can this then be achieved only with
iptables and tc?
Best greetings
>From: "hare ram" <hareram@sol.net.in>
>Reply-To: "hare ram" <hareram@sol.net.in>
>To: <lartc@mailman.ds9a.nl>
>Subject: Re: [LARTC] incoming traffic??
>Date: Sun, 11 May 2003 10:21:16 +0530
>
>Hi
>
>AFAIK,
>
>If you have Two interfaces, better you do
>up control in one interface and down in one interface
>this can be achived, even i have tested, not yet kept on live, still some
>more testing iam doing with my test setup
>
>But if you have looking for up+down= total b/w
>people in this Group recomending IMQ, but i have never seen any of the post
>in this group this IMQ successfully running, may be it may be not working
>for me( since iam using bridge)
>
>But you can try, with the help of stef and Patrick help
>
>hare
>----- Original Message -----
>From: "Jose Luis Domingo Lopez" <lartc@24x7linux.com>
>To: <lartc@mailman.ds9a.nl>
>Sent: Saturday, May 10, 2003 11:35 PM
>Subject: Re: [LARTC] incoming traffic??
>
>
> > On Saturday, 10 May 2003, at 16:15:00 +0000,
> > sun reflex4 wrote:
> >
> > > I want to classify incoming traffic and then put them in HTB queues,
>is
> > > that possible with tc (and/or iptables)? and when yes, which chain
>should I
> > > use: PREROUTING, or INPUT?
> > >
> > You should patch your kernel to support IMQ device and configure it, as
> > has been said several times on this list. Check the archives.
> >
> > If you are configuring Linux traffic shaping in a router for a whole net
> > behind it, you can avoid IMQ and shapa incoming traffic in the inner
> > network card, shaping outgoing traffic to your internal network.
> >
> > IP packets travel through the operating system stack following a well
> > defined path, that you can check at:
> > http://www.docum.org/stef.coene/qos/kptd/
> >
> > Regards.
> >
> > --
> > Jose Luis Domingo Lopez
> > Linux Registered User #189436 Debian Linux Sid (Linux 2.5.69)
> > _______________________________________________
> > LARTC mailing list / LARTC@mailman.ds9a.nl
> > http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
> >
>
>_______________________________________________
>LARTC mailing list / LARTC@mailman.ds9a.nl
>http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
_________________________________________________________________
MSN 8 with e-mail virus protection service: 2 months FREE*
http://join.msn.com/?pageþatures/virus
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
next prev parent reply other threads:[~2003-05-11 10:13 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-05-10 16:15 [LARTC] incoming traffic?? sun reflex4
2003-05-10 18:05 ` Jose Luis Domingo Lopez
2003-05-11 4:49 ` hare ram
2003-05-11 10:13 ` sun reflex4 [this message]
2003-05-11 12:37 ` Graste
-- strict thread matches above, loose matches on Subject: below --
2005-10-04 9:33 [LARTC] Incoming traffic? Dominik Werder
2005-10-04 10:00 ` Andreas Klauer
2005-10-04 13:08 ` Edward Smith
2005-10-04 17:53 ` Carl-Daniel Hailfinger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=marc-lartc-105264809431883@msgid-missing \
--to=sunreflex4@hotmail.com \
--cc=lartc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.