From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stuart Mackintosh Date: Mon, 12 May 2003 16:08:10 +0000 Subject: [LARTC] Limit bandwidth per client Message-Id: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Hi all, I have an installation where each user on subnet 192.168.1.0/24 is connected via a multiplexer. The problem is that if any client uses more than about 48Kb/s, the multiplexer crashes. I need to limit each client to under this rate, say 32Kb/s. I have seen examples on creating a class per host but is there a simple way of saying "any host from 192.168.1.0/24" so I dont have 253 rules? Many thanks. stuart -- | http://www.opusvl.com | T: 08717 50 40 02 | F: 08717 50 40 03 | E: sm@opusvl.com _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/