From mboxrd@z Thu Jan 1 00:00:00 1970 From: Eric Leblond Date: Tue, 13 May 2003 09:59:28 +0000 Subject: [LARTC] teql problem MIME-Version: 1 Content-Type: multipart/mixed; boundary="=-XbLf8IVQw1BdUwDcr3GF" Message-Id: List-Id: To: lartc@vger.kernel.org --=-XbLf8IVQw1BdUwDcr3GF Content-Type: text/plain Content-Transfer-Encoding: quoted-printable Hello, I've got problem to add a teql qdisc on a ip_gre tunnel interface. (works with ethernet interface) It does not work after boot, but after some try (with different commands) it began to work. And it is almost persistent because, even if you unload teql and ip_gre modules, it works after reload. reboot is the only thing (I found) that breaks the working state.=20 I really don't know where to look at. I've done a strace to the command when ok and not ok and I did not see what could happened. Any help greatly appreciated ! --=20 Eric Leblond Regit.org --=-XbLf8IVQw1BdUwDcr3GF Content-Type: application/pgp-signature; name=signature.asc Content-Description: This is a digitally signed message part -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.2 (GNU/Linux) iD8DBQA+wMH/nxA7CdMWjzIRAnzEAJ461xlJVZTzyCfFdP8GX59ygMZ9ZQCdE4tm u7qUv054oh+bn330VBthGdc= =tUta -----END PGP SIGNATURE----- --=-XbLf8IVQw1BdUwDcr3GF-- _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/