From mboxrd@z Thu Jan  1 00:00:00 1970
From: Lars Landmark <larslan@solan.zapto.org>
Date: Wed, 14 May 2003 09:20:42 +0000
Subject: [LARTC] HTB timer??
Message-Id: <marc-lartc-105290411713831@msgid-missing>
List-Id: <lartc.vger.kernel.org>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: lartc@vger.kernel.org


Hi;
As I understand, HTB use a timer in order to calculate rate.  In addition 
it also use timer to tell whether classes are allowed to send packets or 
not.                     
Could somebody tell me how this timer is calculated??

If you have, say, a link with capacity 10MB. If you so configure using HTB
two classes with the same parent to use 5MB each with priority 0,1 and 
ceil 10MB.  What would happen if bandwidth decrease to under 5MB.  

Would the highest prio class be the only served??

Thanks in advance

Lars 
Student

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/