From mboxrd@z Thu Jan 1 00:00:00 1970 From: Srikanth Date: Fri, 23 May 2003 08:56:11 +0000 Subject: [LARTC] CBQ DEVICE BW? MIME-Version: 1 Content-Type: multipart/mixed; boundary="------------020102050501020702040801" Message-Id: List-Id: To: lartc@vger.kernel.org --------------020102050501020702040801 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Hi, The CBQ config file shud be some thing like this. DEVICE=eth0,10Mbit,1Mbit RATE=50Kbit WEIGHT=5Kbit Shall i hardcode the DEVICE BW as 10/100 Mbit or Shall i use any other tool like ethtool for getting this. ethtool gives Speed: 10Mbps If so, how about, if i use some other Interfaces other than eth0, like ppp0 or some other? C'd anybody can give a suggestion over this? thanks & regards, Srikanth. --------------020102050501020702040801 Content-Type: text/html; charset=us-ascii Content-Transfer-Encoding: 7bit Hi,

The CBQ config file shud be some thing like this.

DEVICE=eth0,10Mbit,1Mbit
RATE=50Kbit
WEIGHT=5Kbit

Shall i hardcode the DEVICE BW as 10/100 Mbit
or
Shall i use any other tool like ethtool for getting this.
ethtool gives Speed: 10Mbps

If so, how about, if i use some other Interfaces other than eth0,
like ppp0 or some other?

C'd anybody can give a suggestion over this?

thanks & regards,
Srikanth.


--------------020102050501020702040801-- _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/