From mboxrd@z Thu Jan 1 00:00:00 1970 From: Nickola Kolev Date: Mon, 26 May 2003 20:03:35 +0000 Subject: Re: [LARTC] Ethernet Bonding MIME-Version: 1 Content-Type: multipart/mixed; boundary="=.:Zaff)_fp,W5q_" Message-Id: List-Id: References: In-Reply-To: To: lartc@vger.kernel.org --=.:Zaff)_fp,W5q_ Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit On Mon, 26 May 2003 18:56:27 +0200 "GoMi" wrote: : : -----BEGIN PGP SIGNED MESSAGE----- : Hash: SHA1 : : I have to DSL connections with the same providrer, but different public IP's, they are connected to my box to one interface each, and i am doing load balancing right now, i would like to know if it is possible to do an ethernet bonding, keeping the load balancing, and treat both ethernets as one. I have already set up the bond, but i do not get right the routing tables. Anyone? If you're going to use bonding, you need the proper switch support from the other side. For more info, read /usr/src/linux/Documentation/networking/bonding.txt There's enough info in there, I think. ;) -- _____________________________________________________________ "Engineering does not require science. Science helps a lot but people built perfectly good brick walls long before they knew why cement works." -Alan Cox --=.:Zaff)_fp,W5q_ Content-Type: application/pgp-signature -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.2 (GNU/Linux) iD8DBQE+0nMcKagUb5QT4IYRAvaoAKDSJLIAbNscgIigNVQ8KwuBmDYcJgCfSE60 jKGCrNu2yYu4ortNJo4DjTU= =kn70 -----END PGP SIGNATURE----- --=.:Zaff)_fp,W5q_-- _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/