From mboxrd@z Thu Jan 1 00:00:00 1970 From: "William L. Thomson Jr." Date: Wed, 04 Jun 2003 14:59:32 +0000 Subject: Re: [LARTC] etherchannel/port group/bonding plus vlan works well Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Ryan, That's one way. On Tue, 2003-06-03 at 01:18, rgoldber-list-lartc@bitburst.com wrote: > Computer is dell powerdge 350 with 2 > intel 82559 10/100 nic running stock 2.4.20. I tried both the eepro100 > and the e100 drivers for the nics, both work 802.1q and bonding are modules. > Switch is cisco 2924xl-en running ios 12.0(5)XU. I recommend sticking with e100 and getting the latest version from Intel. In the mean time also get a package from Intel called IANS. IANS will allow you to load balance or bond up to like 8 nics to one IP. I used it for several years and it was assume. > ANd here is the bare bones of the config for the switch > > interface FastEthernet0/1 > port group 1 > switchport trunk encapsulation dot1q > switchport mode trunk > ! > interface FastEthernet0/2 > port group 1 > switchport trunk encapsulation dot1q > switchport mode trunk > ! > interface FastEthernet0/5 > switchport access vlan 5 > ! > interface FastEthernet0/10 > switchport access vlan 10 > ! My switch config was different. When using IANS all I had to do was set up a port group and map the interfaces to it. interface FastEthernet2/3 description Ethernet 1 duplex full speed 100 port group 1 ! interface FastEthernet2/4 description Ethernet 2 duplex full speed 100 port group 1 ! > and all works quite well Always good to know of other ways to do it. Your way is good to know, because IANS requires at least one Intel nic. -- Sincerely, William L. Thomson Jr. Support Group Obsidian-Studios, Inc. 3548 Jamestown Ln. Jacksonville, FL 32223 Phone/Fax 904.260.2445 http://www.obsidian-studios.com _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/